Industrial-grade desiccant dehumidifier for the home or office. Can be run for 24 hours a day and connected to multiple rooms as a central dehumidifier! Remove up to 12L of moisture a day and to as low as 10%RH.
Ionmax+ EcorPro DryFan®
Industrial Dehumidifier for 24/7 Home Use
Powerful and Efficient
The DryFan® industrial dehumidifier range for homes was designed specifically for drying all day and every day.
DryFan® is the safer alternative to domestic dehumidifiers if you need 24/7 dehumidification at home.
Moisture Removal Rates
DF8 - 8 L/day
DF12 - 12L/day
Mild steel with tough epoxy paint finish. Metal construction on the inside and out - designed for long term use and to cope with moving the unit on a frequent basis if needed.
UK Patented Design
Fully Automatic Dehumidifier for 24/7 Use
Continues Operating In Temperatures as Low as -20°C
Dries 4 to 7 times Faster than Traditional Dehumidifiers
Use as Freestanding Unit or Mount in Any Configuration
Equivalent to a 25 Liter Dehumidifier
The Ionmax EcorPro DryFan® dehumidifier dries even below 5°C when all other dehumidifiers stop working.
Below 25°C, it often works 4-6 times better at extracting water than much larger normal dehumidifiers at room temperatures.
It's ideal not just for domestic home use, but also for flood drying, building maintenance, and storage.
Powerful DryFan® Technology
How it works
The Ionmax+ EcorPro DF8 and DF12 desiccant dehumidifiers use DryFan® technology and uses a continuously rotating moisture absorbing patented wheel termed a “Rotor”.
A highly efficient yet low noise fan draws air into the unit (Process Air) and forces it through a section of the rotor.
As the air passes through the rotor, the honeycomb, of hygroscopic membranes absorbs almost all of the moisture creating an extremely dry airstream.
Duct air in from the same room or a remote point
Concentrate the most damp air into the DF8 / DF12 to be dried if needed.
The Ionmax+ EcorPro DryFan® Dehumidifier is fitted with a metal duct flange on the filter grill. This gives you the option to install an external 125mm duct to draw in the air from a more remote point.
Vents moisture out
The DryFan® dehumidifier does not produce liquid water.
Instead it vents water through a 41mm (1-1/2") exhaust pipe. This pipe can be a flexible hose or a common push-fit waste water pipe that you can get in any local DIY store.
Due to this, the Dryfan® is a fully automatic dehumidifier that can be run 24/7 with no buckets of water to empty every day.
Differences between the DryFan® DF8 and DF12
- The DF8 does not have a dry air outlet flange.
Thus, dry air will be filtered out into the same space.
- Max 0.6m wet air out duct length
- Max 1m process air in duct length
- 8L/day extraction rate
- Dimensions: 200mm (height) x 200mm (width) x 200mm (length)
- The DF12 has a dry air outlet flange for adding a duct of up to 3m.
With this, you have the option of adding a duct to exhaust dry air out or to a different space.
- Max 1m wet air out duct length
- Max 3m process air in duct length
- 12L/day extraction rate
- Dimensions: 200mm (height) x 200mm (width) x 300mm (length)
Ionmax+ EcorPro DryFan®
Standard sized fittings for input air duct (125mm) and wet air exhaust (40mm) are easy to source from your local DIY stores.
Long ~4m power cord - No need to join cables when placed in crawl spaces or lofts in the home.
Ideal for areas in the home that are not heated but prone to dampness, such as laundry rooms, basements & crawl spaces.
With the DryFan® DF12, dry, clean air can be ducted out to where you want. Ideal for use in lofts to keep underground rooms or bathrooms dry. Much more energy efficient than an extractor fan.
The DryFan dehumidifier can be used as a freestanding dehumidifier or installed in a cupboard space. Quiet and out of sight. Protect your home while saving space.
Automatically restarts operation when the power supply returns after an interruption.
Safe to Use
The patented technology is both safe and energy efficient and can never overheat to hazardous temperatures, even if vents become accidentally blocked.
Low Noise Fan
At under 50dB, its low noise fan makes this model ideal for small spaces such as bedrooms and workspaces.
Flat handle that can be extended to allow easy carrying in one hand.
Secure Anchor Points
Install the dehumidifier in any configuration
Its anti-scratch plastic feet can be swivelled out to make four anchor points so that the dehumidifier can be fastened with suitable screws or bolts (not provided) to walls or simply fastened down onto a surface.
Wall mounted dehumidifier
Under-house dehumidifier or ceiling dehumidifier
Basement dehumidifier or bathroom dehumidifier
Regulate humidity on the unit or remotely.
There is both and internal humidistat fitted and the possibility to put on an external humidistat but one can also be added very easily.
An optional (add-on) remote humidistat control can be connected to turn the dehumidifier on an off automatically remotely if the dehumidifier is concealed or ducted in position.
Ionmax+ EcorPro DryFan® Brochure
Ionmax+ EcorPro DryFan® User Manual
Ionmax+ EcorPro DryFan® Quick Installation Guide
About the DryFan® Dehumidifiers
Installing a DryFan® Dehumidifier
How to Install a Whole House Dehumidifier
Ionmax+ EcorPro DryFan® DF8 and DF12
Industrial Desiccant Dehumidifier Reviews
Does the job, works very well in my art studio. I can set to an ideal humidity level for safe storage of paintings. I just would have appreciated the required drainage parts to be supplied in the package, rather than having to run around trying to source before I could use. Staff were very helpful once I reached out.
5 Star service, Advice, Delivery...Product quality & performance is 5 Star!!